Glass Splashback Cost in Sydney (2026)
In Sydney a glass splashback is priced by the area, the colour and finish, and the cutouts, as a single toughened-glass panel behind the bench.
Your glass splashback details
Your estimate sits within the typical range.
Your estimate sits within the typical range.
Each powerpoint and tap needs a precise cut-out made before the glass is toughened, you cannot drill it afterwards. Confirm every cut-out at the template stage, a mistake means a new panel.
Glass splashbacks are seamless (no grout), easy to clean and available in any colour. They are made to measure and toughened, so the template and cut-outs must be exact, changes after toughening mean a new panel.
Ways to save
- Standard coloured glass is cheaper, use low-iron only for whites and pale colours where the green tint shows.
- Confirm every cut-out at the template stage, errors mean a whole new panel.
- A glass splashback avoids ongoing grout cleaning, factor the long-term convenience.
How we estimate this
A glass splashback in Australia typically costs around $500 to $900 per square metre supplied and installed in 2026, with printed and low-iron glass higher. A standard kitchen splashback is often $1,000 to $2,500.
Pricing reviewed: October 2026.
What a glass splashback costs in Sydney
A glass splashback in Sydney is costed by the area in square metres, the colour and finish, and the cutouts needed, because a glass splashback is a single sheet of toughened glass, usually back-painted in a colour, fixed to the wall behind a kitchen bench or cooktop, so the area and the colour lead the figure. A small splashback in a standard colour is modest, while a large run, a printed or metallic finish, or many power-point cutouts costs more, so the area, the finish and the cutouts drive the price.
Sydney's apartments and terraces often fit a glass splashback for its seamless, grout-free, easy-clean surface in a compact kitchen, which suits the city's high-value eastern-suburbs renovations. The city's highest trade rates apply. The glass is templated, toughened and back-painted off-site then fixed in one piece, so the measure and the colour matching matter. Behind a gas cooktop the glass must keep the required clearance or be rated for it. A power-point cutout is pre-cut, and a licensed electrician disconnects and reconnects the outlet. A glass splashback is fitted by a glazier or splashback installer, with a licensed electrician for any power-point work, in New South Wales under NSW Fair Trading.
A glass splashback is glazing fitted by a glazier or splashback installer rather than a licensed building trade, so no building licence applies, though a licensed electrician does any power-point disconnection and a gas cooktop needs its clearance, in New South Wales under NSW Fair Trading. For a Sydney kitchen, the clearest way to price a glass splashback is by the area, the colour and finish, and the cutouts.
Compare against the national picture: Glass Splashback Cost in Australia →
Glass Splashback Cost in other cities
Frequently asked questions
How is a glass splashback priced in Sydney?
By the area in square metres, the colour and finish, and the cutouts, so a small splashback in a standard colour is modest while a large run, a printed finish or many cutouts costs more in Sydney.
Why fit a glass splashback in Sydney?
Its seamless, grout-free, easy-clean surface suits a compact apartment or terrace kitchen, which is popular in the city's eastern-suburbs renovations in Sydney.
What about a power point or gas cooktop in Sydney?
A power-point cutout is pre-cut and a licensed electrician disconnects and reconnects the outlet, and behind a gas cooktop the glass must keep the required clearance or be rated for it in Sydney.
Do I need a licence for a glass splashback in Sydney?
No. It is fitted by a glazier or splashback installer, not a licensed building trade, though a licensed electrician does any power-point work, in New South Wales under NSW Fair Trading.