Glass Splashback Cost in Adelaide (2026)
In Adelaide a glass splashback is priced by the area, the colour and finish, and the cutouts, with the cheapest mainland labour keeping it affordable.
Your glass splashback details
Your estimate sits within the typical range.
Your estimate sits within the typical range.
Each powerpoint and tap needs a precise cut-out made before the glass is toughened, you cannot drill it afterwards. Confirm every cut-out at the template stage, a mistake means a new panel.
Glass splashbacks are seamless (no grout), easy to clean and available in any colour. They are made to measure and toughened, so the template and cut-outs must be exact, changes after toughening mean a new panel.
Ways to save
- Standard coloured glass is cheaper, use low-iron only for whites and pale colours where the green tint shows.
- Confirm every cut-out at the template stage, errors mean a whole new panel.
- A glass splashback avoids ongoing grout cleaning, factor the long-term convenience.
How we estimate this
A glass splashback in Australia typically costs around $500 to $900 per square metre supplied and installed in 2026, with printed and low-iron glass higher. A standard kitchen splashback is often $1,000 to $2,500.
Pricing reviewed: October 2026.
What a glass splashback costs in Adelaide
A glass splashback in Adelaide is costed by the area in square metres, the colour and finish, and the cutouts needed, because a glass splashback is a single sheet of toughened glass, usually back-painted, fixed to the wall behind a bench or cooktop, so the area and the colour lead the figure. A small splashback in a standard colour is modest, while a large run, a printed or metallic finish, or many power-point cutouts costs more. The affordable labour that marks the city out keeps the fit the cheapest of any mainland capital.
Adelaide's kitchen renovations suit a glass splashback for its seamless, easy-clean surface, and a stone cottage with a modern kitchen can pair the old with a clean glass panel. The dry climate is no issue for the glass. The glass is templated, toughened and back-painted off-site then fixed in one piece. Behind a gas cooktop the glass keeps the required clearance or is rated for it, and a licensed electrician handles a power-point cutout. The cheap local labour makes a large splashback more affordable than in the dearer capitals. A glass splashback is fitted by a glazier or splashback installer, with a licensed electrician for any power-point work, in South Australia under Consumer and Business Services.
A glass splashback is glazing fitted by a glazier or splashback installer rather than a licensed building trade, so no building licence applies, though a licensed electrician does any power-point disconnection and a gas cooktop needs its clearance, in South Australia under Consumer and Business Services. For an Adelaide kitchen, the clearest way to price a glass splashback is by the area, the colour and finish, and the cutouts, with cheap labour keeping it affordable.
Compare against the national picture: Glass Splashback Cost in Australia →
Glass Splashback Cost in other cities
Frequently asked questions
Is a glass splashback cheap in Adelaide?
Comparatively. The affordable labour that marks the city out keeps the fit the cheapest of any mainland capital, so a large splashback is more affordable in Adelaide than in the dearer capitals.
How is a glass splashback priced in Adelaide?
By the area in square metres, the colour and finish, and the cutouts, so a small splashback in a standard colour is modest while a large run, a printed finish or many cutouts costs more in Adelaide.
Does a glass splashback suit a stone cottage in Adelaide?
It can. A stone cottage with a modern kitchen can pair the old with a clean, seamless glass panel in Adelaide.
Do I need a licence for a glass splashback in Adelaide?
No. It is fitted by a glazier or splashback installer, not a licensed building trade, though a licensed electrician does any power-point work, in South Australia under Consumer and Business Services.