Glass Splashback Cost in Melbourne (2026)
In Melbourne a glass splashback is priced by the area, the colour and finish, and the cutouts, as a seamless toughened-glass kitchen panel.
Your glass splashback details
Your estimate sits within the typical range.
Your estimate sits within the typical range.
Each powerpoint and tap needs a precise cut-out made before the glass is toughened, you cannot drill it afterwards. Confirm every cut-out at the template stage, a mistake means a new panel.
Glass splashbacks are seamless (no grout), easy to clean and available in any colour. They are made to measure and toughened, so the template and cut-outs must be exact, changes after toughening mean a new panel.
Ways to save
- Standard coloured glass is cheaper, use low-iron only for whites and pale colours where the green tint shows.
- Confirm every cut-out at the template stage, errors mean a whole new panel.
- A glass splashback avoids ongoing grout cleaning, factor the long-term convenience.
How we estimate this
A glass splashback in Australia typically costs around $500 to $900 per square metre supplied and installed in 2026, with printed and low-iron glass higher. A standard kitchen splashback is often $1,000 to $2,500.
Pricing reviewed: October 2026.
What a glass splashback costs in Melbourne
A Melbourne glass splashback is worked out from the wall area in square metres, the back-painted colour or printed finish picked, and the cutouts for power points, because the panel is one toughened sheet behind the bench or cooktop. A small stock-colour panel sits low and a long run, a metallic or custom-printed finish, or several cutouts higher, so the area, the finish and the cutouts carry the Melbourne figure.
In a Victorian or Edwardian period home given a modern kitchen, a glass splashback adds a clean, seamless panel in a bold or soft colour that plays against the period shell, and the frosty winter does nothing to the sealed glass. A fitter measures the wall, the panel is colour-backed and toughened at the works, and it is set in one piece, so the template and the colour match are the fussy parts. A gas cooktop keeps its clearance behind the glass and a licensed electrician takes out and refits any power point in the cutout. Trade labour just under Sydney's keeps the Melbourne job reasonable, done by a glazier or splashback installer with a sparky on the outlets.
The panel is fitted by a glazier or splashback installer and is not a licensed building trade, so no building licence applies, while a licensed electrician disconnects any power point and a gas cooktop keeps its clearance, in Victoria under the Victorian Building Authority. A Melbourne splashback prices from the area, the colour or finish, and the cutouts, favoured in a period-home kitchen for the seamless contrast with the old shell.
Compare against the national picture: Glass Splashback Cost in Australia →
Glass Splashback Cost in other cities
Frequently asked questions
How is a glass splashback priced in Melbourne?
By the area in square metres, the colour and finish, and the cutouts, so a small splashback in a standard colour is modest while a large run, a printed finish or many cutouts costs more in Melbourne.
Why choose a glass splashback in Melbourne?
A Victorian or Edwardian period home with a modern kitchen often chooses glass for a clean, seamless look that contrasts the period shell, in a bold or soft colour in Melbourne.
What about a power point or gas cooktop in Melbourne?
A licensed electrician handles a power-point cutout, and behind a gas cooktop the glass keeps the required clearance or is rated for it in Melbourne.
Do I need a licence for a glass splashback in Melbourne?
No. It is fitted by a glazier or splashback installer, not a licensed building trade, though a licensed electrician does any power-point work, in Victoria under the Victorian Building Authority for any building side.