Brick Laying Cost in Hobart (2026)
In Hobart bricklaying is priced per 1000 bricks or per square metre, with the cold affecting mortar curing and a small market firm.
Your brick laying details
Your estimate sits within the typical range.
Your estimate sits within the typical range.
Where the money goes
Estimated breakdown for your configuration
Bricklaying is usually priced per 1,000 bricks laid (plus materials). A rough guide is about 50 bricks per square metre of single-skin wall, so measure the wall to estimate the brick count.
Ways to save
- A straight boundary wall is cheaper per brick than detailed feature work.
- Supplying your own bricks can save on markup if you source them well.
How we estimate this
Brick laying in Australia typically costs $800 to $15,000 in 2026 depending on the number of bricks and job type, usually around $1.50 to $2.50 per brick laid plus materials. A small garden wall is cheapest; a large or feature wall reaches the top.
Pricing reviewed: October 2026.
What a brick laying costs in Hobart
The cost of bricklaying in Hobart comes down to how many bricks go up, usually priced per thousand laid or by the square metre of finished wall, since every brick is a unit of the bricklayer's time, so a wall that needs more bricks runs dearer. A thin single-leaf garden or boundary wall carries far less brick per square metre than a double-leaf cavity wall, and it is that wall type that fixes the brick tally behind the quote. The small Tasmanian market with limited competition keeps the rate firm, and specialist or matching bricks can carry island freight.
The Tasmanian cold bears directly on a Hobart bricklaying job, because fresh mortar that freezes before it has set is ruined, so bricklayers hold off in a hard frost or tent and warm the work above freezing, and the cool, damp air stretches out how long each lift takes to cure, both of which can drag a winter build. The city's colonial heritage means a lot of old brick and sandstone, so a repair or extension that matches the original heritage brickwork is slower, specialist work than plain common brick. Access and height matter, as a low wall is laid fast while a tall wall needs scaffold that adds hire, time and the operator's high-risk-work ticket. Sloping sites can mean stepped footings and retaining brickwork. Face brick on show is laid more slowly than common brick behind render.
Bricklaying itself is a trade rather than a separately licensed building activity, but structural or load-bearing brickwork over the licensing threshold must be done or supervised by a licensed builder in Tasmania under the state regulator, and a retaining wall over a height needs engineering. For a Hobart job, the clearest way to price bricklaying is by the brick count and wall type, with the cold affecting curing and the small market keeping the rate firm.
Compare against the national picture: Brick Laying Cost in Australia →
Brick Laying Cost in other cities
Frequently asked questions
How is bricklaying priced in Hobart?
Per thousand bricks or per square metre of wall, because the labour is the time to lay each brick, so a wall with more bricks costs more, with the small Tasmanian market keeping the rate firm and matching bricks carrying island freight to Hobart.
Does the cold affect bricklaying in Hobart?
Yes. Mortar must not freeze before it cures, so laying in a hard Hobart frost is avoided or the work protected and kept above freezing, which can slow a winter job, and the cool, damp conditions lengthen curing.
Is matching heritage brick harder in Hobart?
Yes. Hobart's colonial heritage means a lot of old brick and sandstone, so a repair or extension that matches the original heritage brickwork is slower, specialist work than laying plain common brick.
Do I need a licence for bricklaying in Hobart?
Bricklaying is a trade, not a separately licensed activity, but structural or load-bearing brickwork over the licensing threshold must be done or supervised by a licensed builder in Tasmania under the state regulator.