Brick Laying Cost in Brisbane (2026)
In Brisbane bricklaying is priced per 1000 bricks or per square metre, with the brick count, wall type and access the drivers.
Your brick laying details
Your estimate sits within the typical range.
Your estimate sits within the typical range.
Where the money goes
Estimated breakdown for your configuration
Bricklaying is usually priced per 1,000 bricks laid (plus materials). A rough guide is about 50 bricks per square metre of single-skin wall, so measure the wall to estimate the brick count.
Ways to save
- A straight boundary wall is cheaper per brick than detailed feature work.
- Supplying your own bricks can save on markup if you source them well.
How we estimate this
Brick laying in Australia typically costs $800 to $15,000 in 2026 depending on the number of bricks and job type, usually around $1.50 to $2.50 per brick laid plus materials. A small garden wall is cheapest; a large or feature wall reaches the top.
Pricing reviewed: October 2026.
What a brick laying costs in Brisbane
Bricklaying in Brisbane is costed by the number of bricks laid, quoted per thousand bricks or per square metre of wall, because the labour is the time to lay each brick, so a wall with more bricks costs more. A single-skin screen or boundary wall uses far fewer bricks per square metre than a double-skin cavity wall, so the wall type sets the brick count the figure follows.
Many Brisbane homes are the classic timber Queenslander rather than full brick, so a common job is a brick ground-floor enclosure under a raised Queenslander, a brick feature wall, fence or retaining wall rather than a whole brick house, which shapes the brick count. Access and height matter, as a low wall is laid from the ground fast while a tall or two-storey wall needs scaffold that adds hire, time and the operator's high-risk-work ticket. The subtropical humidity means mortar is kept workable in the heat and brickwork is protected from a sudden storm-season downpour while it cures. Service labour near the national baseline keeps the rate a touch below the southern capitals, and face brick on show is laid more slowly than common brick behind render.
Bricklaying itself is a trade rather than a separately licensed building activity, but structural or load-bearing brickwork over the licensing threshold must be done or supervised by a licensed builder, with licensing in Queensland under the state regulator, and a retaining wall over a height needs engineering. For a Brisbane job, the clearest way to price bricklaying is by the brick count and wall type, with access, height and the storm-season weather the main drivers.
Compare against the national picture: Brick Laying Cost in Australia →
Brick Laying Cost in other cities
Frequently asked questions
How is bricklaying priced in Brisbane?
Per thousand bricks or per square metre of wall, because the labour is the time to lay each brick, so a wall with more bricks costs more, and a double-skin cavity wall uses far more bricks per square metre than a single-skin wall in Brisbane.
What are common brick jobs in Brisbane?
Because many Brisbane homes are the classic timber Queenslander rather than full brick, a common job is a brick ground-floor enclosure under a raised Queenslander, a brick feature wall, fence or retaining wall rather than a whole brick house.
Does the humidity affect bricklaying in Brisbane?
Yes. The subtropical humidity means mortar is kept workable in the heat and brickwork is protected from a sudden storm-season downpour while it cures, which the bricklayer manages on a Brisbane job.
Do I need a licence for bricklaying in Brisbane?
Bricklaying is a trade, not a separately licensed activity, but structural or load-bearing brickwork over the licensing threshold must be done or supervised by a licensed builder, with licensing in Queensland under the state regulator.