Rewiring House Cost in Hobart (2026)
In Hobart a house rewire is priced by the points and circuits plus the switchboard, with heritage homes trickier and a small-market rate firm.
Your rewiring house details
Your estimate sits within the typical range.
Your estimate sits within the typical range.
Where the money goes
Estimated breakdown for your configuration
Rewiring is disruptive, cable has to be run through walls and ceilings, so it is far cheaper done during a renovation when walls are already open. Budget for make-good plaster and paint.
Ways to save
- Rewire during a renovation while walls and ceilings are already open, to save on access and make-good.
- A partial rewire of problem circuits is far cheaper if the rest of the wiring is sound.
How we estimate this
Rewiring a house in Australia typically costs $3,500 to $25,000 in 2026 depending on home size and scope. A partial rewire of a small home is cheapest; a full rewire with a switchboard upgrade on a large two-storey home reaches the top.
Pricing reviewed: October 2026.
What a rewiring house costs in Hobart
A house rewire in Hobart is worked out from the number of power points, light points and circuits, plus a new switchboard, because the labour is running new cable to every outlet and fitting, so a larger home with more points costs more. The small Tasmanian market with limited competition keeps a rewire rate firm, which matters for a labour-heavy job, and a specialist switchboard component can carry island freight. The scope sets the first figure, full versus partial.
Hobart's colonial and heritage homes are the common and trickier rewire, because solid stone, brick or lath-and-plaster walls and old, settled structures make fishing cable harder than a modern timber-framed home, the patching needs care on heritage fabric, and such homes often still carry original, perished wiring that is a real safety risk and the usual trigger. Sloping sites around Hobart can put a subfloor at an awkward angle for cable runs. The cold climate is no factor for the work itself, though a heavily electric-heated home may need circuits sized for the winter load. A rewire is cheapest with walls open in a renovation, which many owners time with insulation and heating work given the climate.
A house rewire is licensed electrical work that must be carried out by a licensed electrician in Tasmania, with electrical licensing under the state regulator rather than Tasmanian occupational building licensing, and the finished installation is tested and certified. For a Hobart home, the clearest way to price a rewire is by the number of points and circuits plus the switchboard, with heritage walls and the firm small-market rate the main factors.
Compare against the national picture: Rewiring House Cost in Australia →
Rewiring House Cost in other cities
Frequently asked questions
Are heritage homes harder to rewire in Hobart?
Yes. Hobart's colonial and heritage homes have solid stone, brick or lath-and-plaster walls and old, settled structures that make fishing cable harder than a modern timber-framed home, the patching needs care on heritage fabric, and they often carry perished original wiring.
Is a house rewire dearer in Hobart?
Firm, rather than cheap. The small Tasmanian market with limited competition keeps a rewire rate firm, which matters for a labour-heavy job, and a specialist switchboard component can carry island freight, adding to a Hobart rewire compared with the mainland.
How is a house rewire priced in Hobart?
From the number of power points, light points and circuits plus a new switchboard, because the labour is running new cable to every fitting, so a larger Hobart home costs more, with heritage walls lifting the labour and a full rewire dearer than a partial one.
Do I need a licensed electrician to rewire in Hobart?
Yes. A house rewire is extensive fixed wiring that must be carried out by a licensed electrician in Tasmania, with licensing under the state regulator rather than Tasmanian occupational building licensing, and the finished installation is tested and certified.