Typical in Melbourne: $4,800

Garage Door Cost in Melbourne (2026)

Melbourne's deep trade pool keeps garage doors competitive, with insulation a common upgrade.

Your garage door details

doors
Estimated garage door cost · VIC$2,900 – $4,050Indicative estimate only
What’s affecting your estimate
▲ Double (approx 4.8m to 5.2m wide)+ Remove and dispose of old door
$3,483Midpoint
Market ratesRecent
VICYour location
How your estimate comparesTypical range
$3,483
$1,664$7,800
✓

Your estimate sits within the typical range.

💡Any automatic garage door must have working auto reverse safety, and modern installs include a photo eye beam across the opening. If you are keeping an old motor with a new door, have the reversing force and the safety beam tested and documented, because entrapment under a door with failed auto reverse is the serious risk in this category.

💡The springs, not the door, are what fail. A torsion spring set is a wear item with a rated cycle life, and a door opened four times a day burns through cycles faster than most people expect.

💰 Ways to save
  • Compare roller against sectional on your actual garage rather than on price alone. A roller door is typically 25 to 30 per cent cheaper and needs almost no headroom, which makes it the right answer for a low clearance garage or a carport conversion. A sectional panel door costs more but seals better, insulates better, looks considerably better from the street and lets you keep storage in the ceiling space, which matters if the garage doubles as a workshop.
  • Replace the motor at the same time as the door if the existing opener is more than about ten years old. Fitting a new door to a tired motor means the new door is only as reliable as the oldest component, and a service call to replace the opener later costs a separate call out fee plus labour. Bundled into the original install, the motor upgrade is typically a few hundred dollars rather than a whole visit.
  • Do not chase the cheapest steel gauge. Thin panel doors dent from a stray basketball or a reversing bumper tap, and a dented sectional panel usually cannot be repaired, only replaced, which means matching a colour that has already faded. Paying a little more for a heavier gauge on a door that faces the street is one of the more sensible upgrades in this category.
  • Get the spring cycle rating stated on the quote. Standard torsion springs are commonly rated for something like ten thousand cycles, which sounds enormous until you realise a family opening the door four times a day uses well over a thousand a year. High cycle springs cost modestly more upfront and can double or triple the service life, which is a much better deal than a spring replacement call out in year seven.

or from $17/week over 5 years , indicative finance

How we estimate this

## What a new garage door costs in 2026

Pricing reviewed: June 2026.

What a garage door costs in Melbourne

Melbourne has a strong, competitive market for garage doors, so a standard sectional door with an opener is keenly priced if you gather a few quotes. The cold winters drive one local upgrade: as more Melbourne garages double as workshops, gyms or rooms, insulated doors that keep the cold out are a more common choice here than in the warm capitals, and they carry a premium over an uninsulated panel.

Sectional (panel-lift) doors are the standard, with roller doors common on narrower or older openings. The price scales with size, material, insulation and the opener. Period homes may call for a custom timber or heritage style. For most Melbourne homes, the door size and whether it is insulated, along with the motor, are the main things that shape the quote, on competitive local labour.

Compare against the national picture: Garage Door Cost in Australia →

Garage Door Cost in other cities

Frequently asked questions

How much does a new garage door cost in Australia?

A single roller door is about $1,100 to $1,900 installed in 2026 and a single sectional panel door $1,800 to $2,900. Doubles run roughly $1,700 to $2,800 for a roller and $2,600 to $4,500 for a sectional. A motor adds $500 to $1,100 with remotes, and custom timber or clad doors start around $6,000 and can pass $12,000 on a double.

Roller or sectional, which should I choose?

Roller doors are 25 to 30 per cent cheaper, need almost no headroom and suit tight garages and carport conversions. Sectional panel doors cost more but seal better against wind driven rain and dust, insulate properly, run quieter and look considerably better from the street. If the garage doubles as a workshop or gym, the sectional is usually the better long term buy.

Do I need a cyclone rated garage door?

If you are in far north Queensland, the Northern Territory top end or parts of northern Western Australia, yes. Doors must meet the wind classification for the region, because a garage door failure in a cyclone pressurises the house and is a known cause of roofs lifting. Cyclone rated construction adds roughly $1,000 to $2,000, and insurers may decline claims where the door was not rated.

How long do garage door springs last?

Standard torsion springs are commonly rated around ten thousand cycles. A household opening the door four times a day uses more than fourteen hundred cycles a year, so a standard spring set is typically in replacement territory within about seven to ten years. High cycle springs cost modestly more at installation and can double or triple that life, which is better value than an emergency call out.

Is an insulated garage door worth the extra money?

Worth it if the garage is attached to a habitable room, converted to a gym, workshop or home office, or faces hard afternoon sun, because an uninsulated steel panel radiates heat into the space very effectively. In a detached storage only garage the insulated panel upgrade of around $900 rarely pays back in comfort or energy terms.

Can I fit a new door to my existing motor?

Often yes, but check the motor's age and the door's weight first. An opener over about ten years old is likely to fail before the new door does, and a heavier clad or insulated panel may exceed the old motor's rated torque. Whatever you do, have the auto reverse force and the photo eye safety beam tested and documented at handover.

Related calculators