Post and Rail Fencing Cost Calculator
Estimate the cost of post and rail fencing, the classic timber or steel rail fence used on acreage, horse properties and rural boundaries. Enter the length, material and number of rails drive the price.
Your post and rail fencing details
Your estimate sits within the typical range.
Post and rail is priced per metre, and the total scales fast on acreage. Material choice (pine vs hardwood vs steel) and the number of rails are the big levers, along with how hard the ground is to dig.
💰 Ways to save
- Get a per-metre rate at your full length, long runs should price well below a short-job rate.
- Treated pine is cheapest, but hardwood or steel lasts longer where horses or stock are involved.
- Clear the fence line and check for rock first, hard digging and rock add to the per-post cost.
or from $16/week over 5 years , indicative finance
How we estimate this
Post and rail fencing in Australia typically costs around $45 to $90 per metre supplied and installed in 2026 for treated pine, with hardwood and steel higher. A 50m run often lands around $2,500 to $4,500, and long acreage runs scale from there.
Pricing reviewed: November 2026.
Doing more than just post and rail fencing?
Build a combined estimate across every part of your project in one place.
Pricing reviewed November 2026. Indicative Australian costs, not a quote.
Understanding post and rail fencing costs in Australia
Post and rail fencing in Australia typically costs around $45 to $90 per metre supplied and installed in 2026 for treated pine, with hardwood and steel higher. A 50m run often lands around $2,500 to $4,500, and long acreage runs scale from there.
Material and rail count are the main drivers. Treated pine is cheapest, hardwood and steel last longer and suit horse and stock properties. Rocky ground, gates and wire infill add to the per-metre rate.
Frequently asked questions
How much does post and rail fencing cost in Australia?
Roughly $45 to $90 per metre supplied and installed in 2026 for treated pine, more for hardwood or steel. A 50m run is often $2,500 to $4,500, scaling up on acreage.
What is the best material for horse fencing?
Hardwood or steel rail lasts longer and resists chewing better than treated pine, which is why they are common on horse properties despite the higher up-front cost.
Are you a rural / fencing contractor?
Everyone on this page is working out what post and rail fencing costs because they are ready to hire. Put your business right beneath the calculator, in your state, so you are who they find. From $50/mo.