Outdoor Screen Cost in Canberra (2026)
Canberra's high labour base and temperature extremes shape an outdoor-screen quote.
Your outdoor screen details
Total run measured along the ground, not the area.
Your estimate sits within the typical range.
Slat gap is the trade off between privacy and airflow. A 15mm gap on 65mm slats gives good privacy at an angle while still letting breeze through, whereas a fully closed screen acts like a solid wall and needs stronger posts to handle wind load.
Timber screens look better for the first two years and worse for the next ten unless you oil them annually. Aluminium costs more up front and then costs nothing, which is why most people replacing a tired timber screen do not go back to timber.
💰 Ways to save
- Measure your run and then design it around standard panel widths rather than asking for everything custom. Most aluminium slat systems come in fixed panel widths, commonly around 1800mm or 2400mm, and every custom cut adds fabrication time and often a 60 to 120 dollar charge per panel. Shifting a post 100mm to land on a standard module can save several hundred dollars across a long run.
- Fix flat to an existing wall or good fence wherever the layout allows. Eliminating posts and footings removes concrete, digging and often a day of labour, and typically cuts around 25 to 30 percent from the cost of that section. It also removes the need to check for services underground, which is a common source of unexpected charges.
- Buy aluminium screening in a manufacturer stock colour. Monument, Woodland Grey, Basalt and Surfmist are almost always in stock, whereas a custom powder coat adds 500 to 900 dollars on a mid-sized job plus two to four weeks of lead time. If you want woodgrain, price it against a stock dark grey first, since the premium is often 15 to 20 percent for a look you may not want in five years.
- If you go timber, spend the difference on the fixings rather than the grade. Stainless steel screws and galvanised post stirrups add perhaps 150 dollars to an eight metre screen and are the single biggest factor in whether it is still straight and sound in year eight. Cheap fixings rust, stain the timber and pull loose long before the battens themselves fail.
or from $16/week over 5 years , indicative finance
How we estimate this
## What outdoor screening costs in Australia in 2026
Pricing reviewed: June 2026.
What a outdoor screen costs in Canberra
The territory's high trade labour base lifts an outdoor-screen install above the national figure, and the smaller market with higher operating costs means fewer installers to compare than the big capitals. Timber, aluminium batten and composite are the common choices for privacy, shade and feature screening in the city's detached housing.
Canberra is inland with no salt exposure, so the material spec is not driven by corrosion as it is on the coast, but the extreme climate is the practical factor: hard frosts, the wide temperature swing and strong UV over the hot dry summers move and fade cheaper timber and composite over time, so a UV-stable, dimensionally stable material and quality fixings hold up better than a budget screen through the freeze-thaw and the summer heat. Freestanding screens need footings that handle the reactive soils and the frost.
Compare against the national picture: Outdoor Screen Cost in Australia →
Outdoor Screen Cost in other cities
Frequently asked questions
How much does aluminium privacy screening cost per metre?
Supplied and installed at 1.8 metres high, powder coated aluminium slat screening runs 300 to 420 dollars per linear metre in 2026. That includes posts, footings and labour on a straightforward flat site. Woodgrain finishes add roughly 15 to 20 percent and custom powder coat colours add a further 500 to 900 dollars per job.
Is timber or aluminium screening cheaper overall?
Treated pine is cheapest up front at 180 to 260 dollars per linear metre and hardwood is 260 to 380 dollars, against 300 to 420 dollars for aluminium. Once you add annual oiling at 120 to 200 dollars and a likely replacement at eight to twelve years, aluminium is usually cheaper across a 15 year horizon.
How tall can a privacy screen be without council approval?
Most Australian councils permit boundary screens and fences up to 1.8 metres, and some zones allow 2.1 metres. Above that you generally need consent. If the screen attaches to a shared dividing fence, state fencing legislation may also require your neighbour's agreement on height and material.
What slat gap gives the best privacy?
A 65mm slat with a 15mm gap blocks direct sightlines from most angles while still allowing airflow. Closing the gap to 5mm gives near total privacy but roughly doubles the wind load, which means bigger posts at closer centres and a higher cost. For most side boundary situations the 15mm gap is the sensible balance.
Can I put a screen next to my pool fence?
Not within 900mm of the outside of the barrier if it is climbable, and horizontal slat screens are treated as climbable. This is one of the most common reasons a pool fails inspection. Either keep the screen beyond the 900mm non-climbable zone or use a vertical slat design cleared with your certifier first.
How much does a matching screen gate cost?
A single aluminium slat gate to match a 1.8 metre screen typically costs 900 to 1400 dollars supplied and installed, including hinges, a latch and posts sized for the swing. Self closing pool compliant hardware adds around 200 to 350 dollars, and a double gate wide enough for a trailer runs 1800 to 2600 dollars.