Epoxy Flooring Cost in Sydney (2026)
In Sydney, humid summers and the city's high labour rates are what shape an epoxy-flooring quote.
Your epoxy flooring details
Your estimate sits within the typical range.
💰 Ways to save
- A roll-on solid-colour coating ($30–$80/m²) is the cheapest finish for a basic garage, while flake and metallic systems cost more for a tougher, better-looking floor.
- Because most jobs carry a minimum charge of $1,500–$2,000+GST, do the whole slab at once to lower the effective per-square-metre rate.
- Pay for proper diamond-grind prep; it's the difference between a coating that lasts 15–20 years and a DIY-style finish that peels in one to three.
or from $15/week over 5 years , indicative finance
How we estimate this
Epoxy flooring is priced per square metre, supplied and installed. A basic roll-on solid-colour coating runs about $30–$80, a flake or decorative system $80–$120 (metallic finishes $100–$160), and a self-levelling or industrial system $90–$140. Almost every job carries a minimum charge of $1,500–$2,000 plus GST regardless of size, so very small floors cost more per square metre than large ones.
Pricing reviewed: June 2026.
What a epoxy flooring costs in Sydney
Epoxy is a chemical cure, and Sydney's humid summers matter for it: a resin floor laid in high humidity can bloom, haze or cure unevenly, so a good installer manages conditions and timing rather than pouring on any hot sticky day, and that care is part of what separates a lasting floor from a cheap one. Slab moisture is the other technical factor, as a damp slab needs testing and a moisture barrier before resin goes down.
Labour is the dearest in the country, so the prep-heavy nature of epoxy work, grinding, patching and priming the slab, sits on top of Sydney's trade rates. Much of the demand is garage and warehouse floors across the metro, and coastal and salt-exposed sites can carry extra slab prep, so the cost swings on the condition of the slab and the control of the cure far more than on the resin itself.
Compare against the national picture: Epoxy Flooring Cost in Australia →
Epoxy Flooring Cost in other cities
Frequently asked questions
How much does epoxy flooring cost in Australia?
Roughly $30–$80 per square metre for a roll-on coating, $80–$120 for flake or decorative and $90–$140 for industrial self-levelling in 2026, plus a minimum job charge of $1,500–$2,000+GST.
What makes epoxy flooring last?
Proper diamond-grind preparation (about $15–$25/m²) and repairing any failing slab before coating. Skipping prep is the main cause of peeling and delamination.
Is a DIY epoxy kit worth it?
Usually not for longevity. DIY kits at $8–$20/m² often peel within one to three years without proper prep, while a professionally prepped floor can last 15–20 years.