Epoxy Flooring Cost in Perth (2026)
Perth's dry climate is ideal for curing epoxy, with isolation the quiet factor in a quote.
Your epoxy flooring details
Your estimate sits within the typical range.
💰 Ways to save
- A roll-on solid-colour coating ($30–$80/m²) is the cheapest finish for a basic garage, while flake and metallic systems cost more for a tougher, better-looking floor.
- Because most jobs carry a minimum charge of $1,500–$2,000+GST, do the whole slab at once to lower the effective per-square-metre rate.
- Pay for proper diamond-grind prep; it's the difference between a coating that lasts 15–20 years and a DIY-style finish that peels in one to three.
or from $15/week over 5 years , indicative finance
How we estimate this
Epoxy flooring is priced per square metre, supplied and installed. A basic roll-on solid-colour coating runs about $30–$80, a flake or decorative system $80–$120 (metallic finishes $100–$160), and a self-levelling or industrial system $90–$140. Almost every job carries a minimum charge of $1,500–$2,000 plus GST regardless of size, so very small floors cost more per square metre than large ones.
Pricing reviewed: June 2026.
What a epoxy flooring costs in Perth
The dry Mediterranean climate is close to ideal for a resin floor: low humidity and warm, stable conditions let epoxy cure clean and predictably, so the blooming and hazing that plague humid cities are far less of a risk here, and an installer has a wider window to pour a floor that sets hard and clear. The sandy ground and slab-on-sand construction are generally dry, which helps with slab-moisture issues.
Labour sits near the national average, so the trade rate is not the premium; isolation is the quiet factor, as specialist resins, flake blends, metallic pigments and topcoats can carry freight and lead time from the eastern states, so an unusual finish may mean a wait and a higher materials cost. For a standard garage or workshop floor, though, the dry curing conditions make Perth one of the more straightforward and reliable places to lay epoxy.
Compare against the national picture: Epoxy Flooring Cost in Australia →
Epoxy Flooring Cost in other cities
Frequently asked questions
How much does epoxy flooring cost in Australia?
Roughly $30–$80 per square metre for a roll-on coating, $80–$120 for flake or decorative and $90–$140 for industrial self-levelling in 2026, plus a minimum job charge of $1,500–$2,000+GST.
What makes epoxy flooring last?
Proper diamond-grind preparation (about $15–$25/m²) and repairing any failing slab before coating. Skipping prep is the main cause of peeling and delamination.
Is a DIY epoxy kit worth it?
Usually not for longevity. DIY kits at $8–$20/m² often peel within one to three years without proper prep, while a professionally prepped floor can last 15–20 years.