Double Glazing Cost in Perth (2026)
Perth's isolation adds freight to every unit, and its double-brick walls change how the frames go in.
Your double glazing details
Retrofit only works where the existing frame can accept the extra unit depth.
Your estimate sits within the typical range.
The frame matters as much as the glass. Fitting a high performance insulated glass unit into a plain aluminium frame lets the frame short-circuit much of the benefit, which is why thermally broken or uPVC frames appear in nearly every serious double glazing quote.
Where the money goes
Estimated breakdown for your configuration
💰 Ways to save
- Do the coldest and hottest elevations first. South-facing rooms in Melbourne, Canberra and Hobart lose the most winter heat, and west-facing glass gains the most summer heat, so glazing those elevations properly delivers most of the comfort benefit for roughly half the whole-house cost. Living areas and bedrooms you occupy at the temperature extremes matter more than a hallway window.
- Ask whether your existing frames can take a retrofit unit before you price full replacement. Many aluminium and timber frames in reasonable condition can accept a slim insulated glass unit, which costs roughly a third less than replacing the whole window and avoids all the reveal, render and architrave make-good. A glazier can tell you in one site visit.
- If noise is the real problem, specify for noise rather than buying generic double glazing. Acoustic performance comes from a wide air gap and two panes of different thickness, not from the label. Secondary glazing with a 100mm gap frequently outperforms a sealed 12mm unit on traffic and aircraft noise at a much lower price, which is the opposite of what most quotes assume.
- Check for state efficiency incentives and lender green loan discounts before you commit. Several Australian states have run household energy upgrade programs that include glazing, and a number of banks offer discounted green home loan rates for verified efficiency improvements, either of which can materially change the payback on a $15,000 project.
or from $62/week over 5 years , indicative finance
How we estimate this
## What double glazing costs in Australia
Pricing reviewed: June 2026.
What a double glazing costs in Perth
Perth is the most isolated capital, and double-glazed units — heavier and more fragile than single glass — carry freight and lead-time costs from the eastern states or overseas that the other cities don't, which shows up in the quote. Hot, dry summers mean the local demand is led by heat and glare control, so tinted and low-E double glazing aimed at cooling load is the typical specification rather than the winter-heating units sold in the south-east.
Much of Perth's housing is double brick rather than timber frame, and fitting new window units into solid masonry reveals is more involved than into a stud wall, which nudges the labour on any job that changes the opening rather than reglazing within it. Against that, Perth's newer outer-suburb stock often has large aluminium windows that retrofit cleanly, so a modern home is among the more affordable to do while a character home in the western suburbs runs well above the baseline.
Compare against the national picture: Double Glazing Cost in Australia →
Double Glazing Cost in other cities
Frequently asked questions
How much does double glazing cost in Australia?
Typically $800 to $1,800 per window installed in 2026, so a whole-house project on ten to fourteen openings usually costs $10,000 to $28,000. Retrofitting a unit into an existing frame runs $550 to $1,100 per window, full replacement $900 to $2,000, and secondary glazing $400 to $850.
Is retrofit double glazing as good as replacement?
Thermally it is close on the glass itself, but it keeps the original frame, so if that frame is plain aluminium it will still conduct heat and can still show condensation. Retrofit is excellent value where frames are sound and deep enough to take the unit, because it avoids all the reveal, render and architrave make-good that full replacement triggers.
Does double glazing actually reduce noise?
Yes, but only if specified for it. Noise reduction comes from a wide air gap and two panes of different thickness, not from double glazing in general. A sealed 12mm cavity with two identical panes does relatively little for low frequency traffic noise, while secondary glazing with a 100mm gap often outperforms it at a much lower price.
What is the payback period on double glazing?
In most Australian climates it runs well over a decade on energy savings alone, and longer in mild coastal zones. The reliable returns are comfort, reduced condensation and noise, plus resale appeal. Cold climate zones with high heating loads, such as Canberra, Hobart and alpine areas, produce the shortest paybacks.
Is Low-E glass worth the extra cost?
Usually yes. A Low-E coating reflects radiant heat and improves the U-value materially for around 15 per cent more than standard clear insulated glass, making it the most cost-effective single upgrade in the specification list. Argon fill adds a smaller further improvement for roughly 10 per cent more again.
Can I put double glazing in a heritage home?
Often only as secondary glazing, which mounts a second pane internally and leaves the original joinery untouched. Heritage overlays commonly prohibit replacing original timber sashes, and secondary glazing is the solution most councils accept because it is reversible and invisible from the street. Confirm with your council before ordering.