Typical in Perth: $7,350

Driveway Cost in Perth (2026)

Perth's sandy soil and flat blocks make driveways relatively cheap, with pavers a local favourite.

Your driveway details

m²
Perth, WA
Estimated driveway cost · WA$3,000 – $4,350Indicative estimate only
$3,672Midpoint
Market ratesRecent
PerthYour location
How your estimate comparesTypical range
$3,672
$3,060$12,240
✓

Your estimate sits within the typical range.

Where the money goes

Estimated breakdown for your configuration

Material & supply$1,45040%
Excavation & base prep$90025%
Labour$90025%
Finishing & drainage$35010%
💰 Ways to save
  • Plain concrete is the value sweet spot, decorative finishes add 40%+.
  • Gravel is cheapest upfront if you accept higher ongoing maintenance.

or from $18/week over 5 years , indicative finance

How we estimate this

Driveways in Australia in 2026 typically cost $65–$150 per square metre depending on material. Plain concrete is mid-range, exposed aggregate and pavers cost more, asphalt is cheaper, and gravel is cheapest.

Pricing reviewed: June 2026.

Use this calculator on your website

Add a branded driveway calculator to your own site, free. Your logo, your prices, and every enquiry comes straight to your inbox. Live in about two minutes — works on WordPress, Squarespace, Wix or raw HTML.

Set up your free calculator →

What a driveway costs in Perth

Perth's free-draining sandy soils and flat terrain are kind to driveways — less of the reactive-clay cracking that drives up costs in Melbourne and Adelaide, and easy excavation and base prep — so a standard driveway on a flat sand-plain block is among the more affordable in the country. Brick and concrete pavers are a long-standing Perth favourite, suited to the soil and easy to repair.

The dry climate means drainage is less of a battle than in the storm-prone eastern cities, though the council crossover carries its own specification as everywhere. Isolation adds a little to imported material costs, and near the coast salt and the look favour certain finishes, but between the sandy soil, the flat blocks and labour around the national average, Perth sits at the affordable end for a standard driveway.

Compare against the national picture: Driveway Cost in Australia →

Driveway Cost in other cities

Frequently asked questions

How much does a driveway cost in Australia?

Driveways typically cost $65–$150/m² in 2026. Plain concrete is mid-range; exposed aggregate and pavers cost more; gravel is cheapest.

What’s the cheapest driveway material?

Gravel is the cheapest, followed by asphalt and plain concrete. Decorative finishes like exposed aggregate cost the most.

Does an old driveway need removing first?

Usually yes, excavation and removal of the old surface and base prep are added to the cost of the new driveway.

Related calculators