Decking in Hobart (2026)

Hobart's cold, sloping sites and island freight are what make a deck here its own kind of job.

m
m
6m4m
Estimated total cost$6,98524m² deck
Materials you’ll need (bill of materials)
Decking boards (140mm hardwood)35 lengths$1,663
Joists15
Bearers4
Posts / footings10
Decking screws≈840
Substructure & fixings$1,482
Installation labour$3,840

or from $33/week over 5 years , indicative finance

How we estimate this

The number of decking boards depends on your deck area, board width and the gap between boards. This calculator allows ~10% for cutting waste and works out the supporting joists, bearers and posts as well.

Pricing reviewed: June 2026.

Use this calculator on your website

Add a branded decking calculator to your own site, free. Your logo, your prices, and every enquiry comes straight to your inbox. Live in about two minutes — works on WordPress, Squarespace, Wix or raw HTML.

Set up your free calculator →

What a decking costs in Hobart

Sloping blocks are common around Hobart, so a great many decks are elevated structures on posts rather than ground-level platforms, and the taller the sub-frame the more engineering, bracing and labour the build carries. Island freight adds cost and lead time to composite boards and specialist timber shipped from the mainland, which a Hobart quote has to absorb, and the smaller trade market means less competition to sharpen prices.

The cool climate with genuinely cold winters cycles timber through damp and frost, so drainage, ventilation under the deck and a durable finishing schedule matter more than in a warm capital. Many homes are colonial or early-twentieth-century with heritage fabric, so tying a new deck to original weatherboard or brick calls for care that adds to the detailing rather than the headline.

Compare against the national picture: Decking in Australia →

Decking in other cities

Frequently asked questions

How many decking boards do I need?

It depends on the deck size, board width and gap. As a guide, 140mm boards with a 4mm gap cover about 7 lineal metres per square metre. The calculator works out the exact count plus waste.

How far apart should deck joists be?

Joists are commonly spaced 450mm apart for residential decks, closer for some composite boards. Always check the board manufacturer’s span requirements and Australian standards.

How much does decking cost per square metre?

Decking typically costs $200–$350 per square metre installed in 2026, depending on material. The calculator separates materials, substructure and labour.

Related calculators