Concrete Driveway Cost in Perth (2026)
In Perth a concrete driveway is priced per square metre by area, finish and reinforcement, with the sandy base and dry-cure heat the factors.
Your concrete driveway details
Your estimate sits within the typical range.
Your estimate sits within the typical range.
Plain concrete is the cheapest and most durable driveway, decorative finishes add cost but also street appeal. A broom finish gives grip for a sloped driveway at the base price.
Steel reinforcement mesh and proper expansion joints are what stop a driveway cracking. Skipping them is the main reason a cheap concrete driveway fails early.
Concrete is more durable and lower-maintenance than asphalt, with a higher up-front cost. Base preparation and reinforcement matter more than the finish, cracking is almost always a prep issue.
Ways to save
- A plain broom finish is the cheapest and extremely durable, pay for decorative finishes only where you want the look.
- Confirm mesh and expansion joints are included, they prevent the cracking that is the main complaint.
- Pour the driveway and any paths in one visit to share the concrete pump and crew.
How we estimate this
A concrete driveway in Australia typically costs around $65 to $100 per square metre for plain concrete supplied and laid in 2026, so a double driveway is often $3,500 to $7,000. Exposed aggregate, coloured and stamped finishes, excavation and drainage push it higher.
Pricing reviewed: October 2026.
What a concrete driveway costs in Perth
A concrete driveway in Perth is priced on the area, the finish and the reinforcement, since a concrete driveway is a poured slab over a compacted base with steel mesh, making it durable and dearer than asphalt. The finish sets much of the cost, as a plain slab is cheapest and exposed aggregate, coloured or liquid-limestone-look finishes each add to the rate, so the area, the finish and the reinforcement lead the figure.
Perth's sandy coastal-plain soils must be consolidated with a compacted crushed-rock base before the slab, because loose sand gives no support, though once prepared it drains well under the concrete. The hot, dry Mediterranean summers mean the pour is cured carefully, as concrete that dries too fast in the heat can crack, so curing and timing matter. Liquid limestone and exposed aggregate are popular Perth finishes suited to the light, bright look of the climate. The sandy soils are stable once compacted. The isolation of the WA market rarely affects a standard pour, labour sits near the national average. It is concreting work rather than a licensed building trade, with a licensed builder for any retaining.
A concrete driveway is laid by a concreter rather than a licensed building trade, so no building licence is required for the driveway itself, though any retaining wall or structural work needs a licensed builder, in Western Australia under WA Building Services. For a Perth home, the clearest way to price a concrete driveway is by the area, the finish and the reinforcement, with the sandy base and the dry-cure heat the factors.
Compare against the national picture: Concrete Driveway Cost in Australia →
Concrete Driveway Cost in other cities
Frequently asked questions
How is a concrete driveway priced in Perth?
By the area, the finish and the reinforcement, since it is a poured slab with steel mesh over a compacted base, so a plain slab is cheapest while exposed aggregate or liquid-limestone finishes add to the Perth rate.
Do the sandy soils affect a concrete driveway in Perth?
Yes. The sandy soils must be consolidated with a compacted crushed-rock base before the slab, because loose sand gives no support, though once prepared it drains well under the concrete in Perth.
Does the summer heat affect curing in Perth?
Yes. The hot, dry Mediterranean summers mean the pour is cured carefully, as concrete that dries too fast can crack, so curing and timing matter for a Perth concrete driveway.
Do I need a licence for a concrete driveway in Perth?
No. Laying it is concreting work by a concreter, not a licensed building trade, though any retaining wall or structural element needs a licensed builder, in Western Australia under WA Building Services.